TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 186 of 764

TM9-2320-361-34

I

7-4. REAR WIRING HARNESS REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

All

TEST EQUIPMENT

Multimeter (Appendix B, Item 3)

TOOLS

General mechanic’s tool kit

(Appendix B, Item

1)

Tool kit, electrical (Appendix B, Item 2)

MATERIALS/PARTS

Fifteen locknuts (Appendix F, Item 89)

Six locknuts (M275A2) (Amendix F. Item 95)

MATERIALS/PARTS (Contd)

Two locknuts (M756A2) (Appendix F,

Item 95)

Twelve locknuts (M764) (Appendix F, Item 95)

Two lockwashers (Appendix F, Item 138)

Five lockwashers (M275A2) (Appendix F, Item 134)

Five tiedown straps (Appendix

C, Item

15)

REFERENCES (TM)

TM 9-2320-361-20

TM 9-2320-361-34P

EQUIPMENT CONDITION

Battery ground cable disconnected

(TM 9-2320-361-20).

NOTE

Tag wires for installation.

1.

2.

Disconnect rear wiring harness (1) from front wiring harness (2).

NOTE

Perform step 2 for M756A2 vehicles.

Disconnect wires (3) and (6) from rear wiring harness wires (4) and (5).

7-35