TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 187 of 764

TM 9-2320-361-34

7-4. REAR WIRING HARNESS REPLACEMENT

(Contd)

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

7-36

Remove locknut (12), lockwasher (13), ground wire (14), and screw (2) from support (1). Discard

locknut (12) and lockwasher (13).

Disconnect plug (11) from fuel pump (10).

Disconnect wire (8) from fuel level sending unit (9).

Remove two locknuts (7), screws (4), and clamps (3) from rear wiring harness (5) and crossmember (6).

Discard locknuts (7).

NOTE

Perform steps 7 through 13 for M275A2 vehicles.

Remove locknut (16), screw (21), lockwasher (22), and ground wire (20) from support (17) and

frame (15). Discard locknut (16) and lockwasher (22).

Disconnect plug (24) from fuel pump (23).

Disconnect wire (18) from fuel level sending unit (19).

Disconnect trailer coupling harness (25) from receptacle (28).

Remove four locknuts (31), lockwashers (30), ground wire (29), guard (32), four screws (27), cap (26),

and receptacle (28) from support (39). Discard locknuts (31) and lockwashers (30).

Remove locknut (37), screw (34), and clamp (33) from rear wiring harness (5) and deck (35). Discard

locknut (37).

Remove five tiedown straps (38) from rear wiring harness (5) and fuel and brake leads (36). Discard

tiedown straps (38).