TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 183 of 764

TM 9-2320-361-34

7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)

35.

36.

37.

38.

39.

40.

41.

42.

43.

44.

45.

46.

47.

48.

49.

50.

7-32

NOTE

Steps 35 through 39 cover the left side front composite lights.

Route wires (13), (14), and (19) through plate (15).

Install grommet (16) in plate (15) and grommet (26) in fender (25).

Connect wires (13), (14), and (19) to wires (12), (27), and (24).

Install plate (15) on four screws (23) with four nuts (18).

Install two clamps (20) on front wiring harness (17) and fender support

(11)

with two screws

(21)

and nuts (22).

Repeat steps 35 through 39 for right side front composite lights.

Connect wire (9) to horn wire (10).

Connect wire (8) to blackout lamp (28).

Connect wires (3) and (5) to lefi headlamp

(l).

Remove slack from front wiring harness

(17).

Install clamp (6) on front wiring harness (17) and stud (29) with nut (7).

Install wires (3), (5), and (8) on brush guard support (2) with new tiedown strap (4).

Connect wires (43) and (64) to horn (44).

Connect wires (36) and (40) to right headlamp (38).

Connect wire (63) to temperature sending unit (31).

Connect wire (33) to preheater wire (32).