TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 184 of 764

TM 9-2320-361-34

7-3. FRONT WIRING HARNESS REPLACEMENT

(Contd)

51. Install plate (56) and spacer (55) on alternator (50) with two new lockwashers (57) and screws (58).

52. Install wire (64) through spacer (55) and on alternator terminal (63) with new lockwasher (65) and

nut (66). Tighten nut (66) 45-55 lb-in. (5-6 N-m).

53. Install wire (53) through spacer (55) and to alternator wire (54).

54. Coat wire (64) and bottom of cover (69) with sealant.

55. Install cover (69) on alternator (50) with two new lockwashers (70) and screws (61).

56. Remove slack

from front wiring harness (52).

57. Install two wires (62) and (36) on brush guard support (35) with new tiedown strap (34).

58. Install clamps (49) and (40) on front wiring harness (52), cable bracket (46), and headlamp

panel (37) with screws (39) and (48) and nuts (41) and (51).

59. Install clamp (59) on front wiring harness (52) and stud (30) with new lockwasher (68) and nut (67).

60. Install clamp (45) on front wiring harness (52) and alternator support plate (43) with screw (44) and

nut (47).

7-33