TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 181 of 764

TM 9-2320-361-34

7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

7-30

Position bracket (4) on two screws (5) so that front wiring harness (8) is between bracket (4) and

steering column (9). Tighten two screws (5).

Connect plug (2) to signal switch (1).

Install clamp (6) on steering column (9) and front wiring harness (8) with screw (7) and nut (3).

Install wire (28) on flasher unit (25) with new lockwasher (26), screw (27), new lockwasher (29), and

nut (30).

Connect plug (24) to flasher unit (25).

NOTE

Perform step 27 for vehicles equipped with fuel pressure sending

units.

Connect wires (32) and (34) to fuel pressure sending unit (33).

Connect wires (18), (19), and (20) to beam selector switch (22).

Connect wires (16) and (17) to circuit breaker (15).

NOTE

Perform steps 30 and 31 for M275A2 vehicles.

Connect wires (36) and (41) to auxiliary circuit breaker (37).

Install clamp (39) on firewall (21) and wiring harness (8) with screw (40) and locknut (38).

NOTE

Assistant will help with steps 32 through 34.

Install two clamp halves (13) on firewall (21) with washer (35), clamp (12), two screws (11), and new

locknuts (14).