TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 171 of 764

TM 9-2320-361-34

7-3. FRONT WIRING HARNESS REPLACEMENT (Contd)

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

7-20

NOTE

Steps

6

through 9 cover the left side front composite lights.

Remove four nuts (8) and plate (5) from four screws

(15).

Disconnect wires (4), (6), and (10) from left composite light wires (3),

(1), and (16)

and remove

plate (5) from wires (4), (6), and

(10).

Remove grommet (7) from plate (5) and grommet (17) from fender (13).

Remove two nuts (14), screws (12), and clamps

(11)

from fender support (2) and front wiring harness (9).

Repeat steps 6 through 9 for right side front composite lights.

Remove two screws (49), lockwashers (58), and cover (57) from alternator (38).

Remove two screws (46), lockwashers (45), plate (44), ans spacer (43) from alternator (34).

Disconnect wire (41) from alternator wire (42).

Remove sealant from nut (54).

Remove nut (54), lockwasher (53), and wire (52) from terminal (51).

Disconnect wire (48) from temperature sending unit

(19).

Disconnect wire (21) from preheater wire (20).

Disconnect two wires (50) from horn (30).

Disconnect two wires (24) from right headlamp (30),

Remove tiedown strap (22) from front wiring harness (40) and brush guard support (23). Discard

tiedown strap (22).