TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 179 of 764

TM 9-2320-361-34

7-3. FRONT WIRING HARNESS REPLACEMENT

(Contd)

2. Connect front wiring harness (1) to rear wiring harness (15).

3. Install front wiring harness (1) on brace (16) with two screws (13) and new locknuts (14).

4. Connect wires (11) and (10) to stoplight switch (12).

5. Remove slack from front wiring harness (1).

6. Install two clamps (3) on front wiring harness (1), brace (4), and frame (9) with two screws (8) and

new locknuts (2).

7. Install clamp (6) on front wiring harness (1) and U-bolt(7) with nut(5).

8. Install clamp (28) on steering column (29) and front wiring harness (1) with screw (31) and nut (30).

9. Connect wire (19) to low air buzzer switch (20).

10. Connect wires (38) and (39) to transfer switch (41) and lamp (40).

11. Connect wire (22) to high beam indicator lamp (36).

12. Connect wire (43) to panel lamp (44).

13. Connect wire (21) to panel lamp (47).

14. Connect wire (34) to wire (35).

15. Connect wire (46) to coolant temperature gage (45).

16. Connect wire (18) to fuel gage (17).

17. Connect wire (37) to oil gage (42).

18. Connect plug (32) to starter switch (33).

7-28