TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 170 of 764

TM 9-2320-361-34

7-3. FRONT WIRING HARNESS REPLACEMENT

THIS TASK COVERS:

a. Removal

b. Installation

INITIAL SETUP

APPLICABLE MODELS

All

TEST EQUIPMENT

Multimeter (Appendix B, Item 3)

TOOLS

General mechanic’s tool kit

(Appendix B, Item 1)

Tool kit, electrical

(Appendix B, Item 2)

Torque wrench, 3/8-in. dr.

(Appendix B, Item 8)

MATERIALS/PARTS

Six lockwashers (Appendix F, Item 132)

Lockwasher (Appendix F, Item 124)

Six locknuts (Appendix F, Item 95)

Three locknuts (Appendix F, Item 89)

Two tiedown straps (Appendix C, Item 15)

Adhesive sealant (Appendix C, Item 2)

REFERENCES (TM)

TM 9-2320-361-20

TM 9-2320-361-34P

EQUIPMENT CONDITION

Accessorv switch removed (TM 9-2320-361-20).

“

NOTE

Tag wires for installation.

1. Disconnect wire (9) from horn wire (8).

2. Disconnect wires (3) and (5) from left headlamp (1).

3. Disconnect wire (11) from blackout drive lamp (12).

4. Remove nut (7) and clamp (6) from front wiring harness (10) and stud (13).

5.

Remove tiedown strap (4) from front wiring harness (10) and brush guard support (2). Discard

tiedown strap (4).

7-19