TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 197 of 764

TM 9-2320-361-34

7-4. REAR WIRING HARNESS REPLACEMENT (Contd)

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

NOTE

Steps

14

and

15 cover the left side rear composite lights.

Connect wires (9), (10), (11), and (12) to rear composite light wires (8), (7), (6), and (5).

Remove slack from rear wiring harness (1) and install clamp (2) and rear wiring harness (1) on

bracket (4) with screw (3) and new locknut (13).

Repeat steps 14 and 15 for right rear composite lights.

NOTE

Perform

steps 17 through 20 for M756A2 vehicles.

Connect wires

(20) and (16) to rear clearance light

wires (14) and (15).

Install clamp

(18) on subframe (21) and rear wiring harness (1) with screw (17) and new locknut (19).

Connect wires (24) and (23) to front clearance wires (25) and (26).

Install clamp (29) on rear wiring harness (1) and

frame

(27) with screw (28) and new locknut (22).

NOT E

Perform

steps 21 through 24 for M275A2 vehicles.

Install

receptacle

(34), cap (32), guard (38), and ground wire (35) on support (30) with four screws (33),

new lockwashers

(36),

and new locknuts (37).

Remove

slack from rear wiring harness (1)

and

install

clamp

(39)

on

rear wiring harness (1) and

deck (41) with screw (40) and new locknut (43).

Install five tiedown straps (44) on rear wiring harness (1) and fuel and brake leads (42).

Connect

trailer coupling harness (31) to receptacle (34).

7-46