TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 357 of 764

TM 9-2320-361-34

15-11.

DISCHARGE VALVE REPAIR (M49A2C AND M50A3)

(Contd)

c. Asssembly

1.

2.

3.

4.

5.

6.

7.

8.

9.

Install new packing (9) in bore (8) of valve housing (7).

Position cam (6) inside valve housing (7) with rounded edge facing up.

Insert cam stem (10) in bore (8) through cam (6) until seated.

Install two new seals (12) and (14) in bore (11) of nut (13). Wrap nut (13) threads with antiseize tape

and install nut (13) over cam stem (10) into valve housing (7).

Install holder (1) and new disc (17) on stem (5) with retainer (16).

Position stem (5) with holder (1), new disc (17), and retainer (16) in valve housing (7) until seated.

WARNING

Eye protection must be worn during spring and cap installation.

Failure to do this may result in injury to personnel.

Position spring (4) over stem (5) on holder (1).

Install cap (3) on stem (5), compressing spring (4) into valve housing (7), with four setscrews (15).

Install strainer (2) over valve housing (7).

15-46