TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 405 of 764
TM 9-2320-361-34
15-24. 115- AND 24-VOLT WIRING HARNESS REPLACEMENT (Contd)
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
15-94
Remove
safety
wire
(3) from wire bunches (1),
(2),
and
(4).
Insert wires (4) through access hole in safety switch box (6).
Install safety switch box (6) on mounting brackets (5) with four new lockwashers (7) and nuts (8).
NOTE
Perform steps
15
through
17
for M185A3 vehicles.
Position nipple (10) with switch bracket (12) through safety switch box (6) and secure nipple (10)
with bushing (9).
Install spacer (15) and switch bracket (12) on van wall
(14)
with two screws (11).
Install start/stop switch (13) into switch bracket
(12).
Insert wires (2) in access hole of multibreaker box (16).
Secure multibreaker box (16) on nipple (20) with bushing (17).
Install multibreaker box (16) on mounting brackets (5) with two new lockwashers (19) and
nuts (18).
Insert wires (1) through access hole in blackout switch (23).
Position blackout switch (23) on nipple (21) and secure with bushing (22).
Install blackout switch (23) on mounting bracket (26) with two new lockwashers (25) and nuts
(24).
Back to Top
