TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 407 of 764
TM9-2320-361-34
15-24. 115- AND 24-VOLT
WIRING HARNESS REPLACEMENT
(Contd)
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
15-96
Install nut (2) and wires (3) and (4) on safety switch box
(1)
with capnut (5).
Back out nut (2) to tighten leads (3) and (4) against capnut (5).
Install two wires (6) on fuse block (8) and tighten two screws (7).
Insert wires
(18)
and (25) through nipple (23) and into multibreaker box (10).
Insert wire (27) through nipple (23), multibreaker box
(10),
nipple (9) and into blackout switch (26).
Insert wires (24) through nipple (23), multibreaker box (10), nipple (9), and into blackout
switch (26).
Install wire (21) on multibreaker box
(10)
with screw (22).
Insert opposite end of wire
(21)
through nipple (9) and into blackout switch (26).
Position wire (18) in multibreaker box
(10)
and tighten screw
(19).
Position wires (25) and (14) in multibreaker box
(10)
and tighten screw (28).
Insert wire (20) in bridge
(15)
and tighten screw
(17).
Install three wires
(12)
on multibreaker box
(10)
with three screws
(13).
Insert four wires (11) in bridge
(15)
and tighten four screws
(16).
Back to Top
