TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 523 of 764
TM 9-2320-361-34
15-49. EARTH BORING AND POLESETTING BODY MAINTENANCE
THIS TASK COVERS:
a. Removal
c. Installation
b.
Inspection
INITIAL SETUP
APPLICABLE MODELS
M764
TOOLS
General mechanic’s tool kit (Appendix B, Item 1)
1-1/8-in. socket, 1/2-in. dr. (Appendix B, Item 10)
1-1/16-in. socket, 1/2-in. dr.
(Appendix
B,
Item 11)
Torque wrench, 1/2-in. dr. (Appendix B, Item 7)
Lifting device
MATERIALS/PARTS
Four locknuts (Appendix F, Item 105)
Four locknuts (Appendix F, Item 104)
EQUIPMENT CONDITION
●
Parking brake set (TM 9-2320-361-10).
. Earth auger bits removed (TM 9-2320-361-10).
●
Cab protector removed (TM 9-2320-361-20).
. Outrigger hydraulic lines removed
(TM 9-2320-361-20).
●
Taillights removed (TM 9-2320-361-20).
●
Taillight wiring harness removed
(TM 9-2320-361-20).
●
Pioneer tool bracket removed (TM 9-2320-361-20).
●
Splash guards removed (TM 9-2320-361-20).
●
Power divider removed (para. 16-15).
●
Earth boring machine removed (para. 15-35).
PERSONNEL REQUIRED
GENERAL
SAFETY INSTRUCTIONS
Two
●
All personnel must stand clear during lifting
operations.
REFERENCES (TM)
●
Ensure lifting capacity is greater than weight of
FM 43-2
frame.
TC 9-510
TM 9-237
TM 9-2320-361-10
TM 9-2320-361-20
TM 9-2320-361-34P
a.
Removal
NOT E
Assistant will help remove and install body.
1. Remove four locknuts (6), washers (7), screws (10), and springs (8) and (9) from brackets (1) of
frame (13) and body (11). Discard locknuts (6).
2. Remove four locknuts (5), washers (4), and screws (3) from four brackets (2) of frame (13) and body (11).
Discard locknuts (5).
3. Install two chains and guidelines on body (11) and attach lifting device to chains.
WARNING
●
All personnel must stand clear during lifting operations. A swinging
or shifting load may cause injury or death to personnel.
●
Ensure lifting capacity is greater than weight of frame. Failure to
do so may result in injury to personnel or damage to equipment.
4. Remove body (11) from frame (13) and place on wooden supports.
5. Remove two sills (12) from frame (13).
6. Remove lifting device, chains, and guide lines from body (11).
15-212
Back to Top
