TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 563 of 764

TM 9-2320-361-34

16-3. REAR WINCH REPAIR (M756A2)

(Contd)

e.

Rear

Winch

End Frame Assembly

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

Apply light coat of sealing compound to elbow (7) threads and install elbow (7) in end frame (15).

Apply light coat of sealing compound to outer diameter of new seal (16) and install seal (16) in end

frame (15).

Position shifter fork (10) in end frame (15).

Position shifter shaft (17) through end frame (15), install new woodruff key (18) on shifter

shaft (17), and install shifter shaft (17) in shifter fork (10).

Install setscrew (9) in shifter fork (10).

Install new pin (14) and sleeve (11) in end frame (15).

Install lock (1) on end frame (15) with two new lockwashers (3) and screws (2).

Install poppet (25), spring (24), and spacer (23) in end frame (15) with poppet nut (20).

Install poppet latch (22) in engaged position on poppet (25) with two jamnuts (21).

Install block (5) on end frame (15) with two screws (4).

Apply light coat of sealing compound to threads of three plugs (6) and plug (8) and install three

plugs (6) and plug (8) on end frame (15) and elbow (7).

Install spring (13) and drag brake (12) in end frame (15) with screw (19).

16-20