TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 566 of 764

TM 9-2320-361-34

16-3.

REAR WINCH REPAIR (M756A2) (Contd)

I

g. Rear Winch Assembly

1. Apply thin coat of sealing compound to outer diameter of new seal (29) and install in drum (28).

2. Apply thin coat of sealing compound to outer diameter of new seal (40) and install in end frame (38).

WARNING

Support drum with overhead lifting device and chain. Failure to do

so may result in injury to personnel or damage to equipment.

3. Install drum (28), drum thrust ring (43), two new woodruff keys (34), drum sliding clutch (42), and

end frame thrust ring (41) on drum shaft (30).

4. Install two jamnuts (32) on rod (33) and install rod (33) on gearcase

(31).

NOTE

Ensure shifter fork engages with sliding clutch when positioning

end frame.

5. Position end frame (38) on rod (33) and drum shaft (30).

6. Install channel (35) on end frame (38) and gearcase (31) with four new lockwashers

screws (37).

7. Install nut (39) on rod (33).

8. Tighten two jamnuts (32) to gearcase (31) and end frame (38).

(36) and

FOLLOW-ON TASK: Install

rear winch (M756A2) (TM 9-2320-361-20).

16-23