TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 565 of 764

TM 9-2320-361-34

16-3. REAR WINCH REPAIR (M756A2) (Contd)

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

Place new woodruff key (20) on worm gear (7) and install brakedrum (17) on worm gear (7) with

washer (10), new lockwasher (11), and screw (12).

Install new plug (19) in brakecase (18).

Install brakeband (16) on brakedrum (17) and brakecase (18) with spring (9), washer (8), and

adjusting screw (6).

Tighten adjusting screw (6) until spring (9) is compressed between 1.125-1.187 in.

(2.86-3.02cm).

Install new gasket (13) and cover (14) on brakecase (18) with six new screw-assembled

lockwashers (15).

Apply light coat of sealing compound to threads of bushing (2) and breather (1) and install

bushing (2) and breather (1) on gearcase (3).

Position gear (25) in gearcase (3) and on worm gear (7).

Install two new woodruff keys (26) on drum shaft (27).

Install drum shaft (27) through gear (25) and gearcase (3).

Install new gasket (22) and cover (23) on gearcase (3) with four screws (24).

Apply light coat of sealing compound to threads of two plugs(21) and install two plugs (21) on

gearcase (3).

Install block (4) on gearcase (3) with two screws (5).

16-22