TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 559 of 764

TM9-2320-361-34

I

16-3. REAR WINCH REPAIR (M756A2)

(Contd)

c. Rear Winch End

Frame Disassembly

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

16-16

Remove drum sliding clutch (12), end frame thrust ring (11), and sleeve (13) from end frame (17).

Remove screw (21), drag brake (14), and spring (15) from end frame (17).

Remove three plugs (6) and plug (8) from end frame (17) and elbow (7).

Remove two screws (4) and block (5) from end frame (17).

Place poppet latch (24) in engaged position.

Remove two jamnuts (23), poppet latch (24), poppet nut (22), spacer (25), spring (26), and

poppet (27) from end frame (17).

Remove two screws (2), lockwashers (3), and lock (1) from end frame (17). Discard lockwashers (3).

Remove setscrew (9) from shifter fork (10).

Remove shifter shaft (19) and woodruff key (20) from end frame (17). Discard woodruff key (20).

Remove shifter fork (10) from end frame (17).

Remove pin (16)

from

end frame (17). Discard pin (16).

Remove seal (18) from end frame (17). Discard seal (18).

Remove elbow (7) from end frame (17).