TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 75 of 764
TM 9-2320-361-34
3-7. ROCKER ARMS AND PUSHRODS MAINTENANCE
(Contd)
d. Rocker Arm Assembly
1. Install
adjustment screw (19) in rocker arm (15) until seated.
2. Install nut (18) on adjustment screw (19). Do not tighten nut (18).
3. Repeat steps 1 and 2 for each rocker arm (3), (5), (7), (9), and (11), as necessary.
4. Position
support (12) on shaft (17) with dowel slot (20) over dowel pin (16).
5. Install rocker arm (11), spring (10), rocker arm (9), support (8), rocker arm (7), spring (6), rocker
arm (5), support (4), rocker arm (3), and thrust washer (2) on shaft (17) with new retainer (1).
6. Install rocker arm (15) on shaft (17) against support (12) with thrust washer (14) and new retainer (13).
3-24
Back to Top
