TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 81 of 764
TM 9-2320-361-34
3-9. TAPPET CHAMBER COVER AND GASKET REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
All
TOOLS
General mechanic’s tool kit
(Appendix B, Item 1)
REFERENCES (TM)
TM 9-2320-361-10
TM 9-2320-361-34P
EQUIPMENT CONDITION
“
Parking brake set (TM 9-2320-361-10).
MATERIALS/PARTS
●
Engine-oil cooler removed (para. 3-13).
Gasket (Appendix F, Item 46)
Sealing compound, thread locking
(Appendix C, Item 18)
Sealing compound, gasket forming
(Appendix C, Item 19)
1. Remove eleven screws (6), washers (5), cover (l), and gasket (2) from three studs (3) and engine
block (4). Discard gasket (2).
2. Remove all remaining gasket (2) material from cover (1) and engine block (4).
1.
Apply a light, even coat of sealing compound on both sides of new gasket (2).
2. Apply a light coat of thread locking sealing compound on the threads of eleven screws (6).
3, Install new gasket (2) and cover (1) on three studs (3) and engine block (4) with eleven washers (5)
and screws (6).
3-3 0
Back to Top
