TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 85 of 764
TM
9-2320-361-34
3-11. OIL PAN REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
All
REFERENCES (TM)
LO 9-2320-209-12-1
TOOLS
TM 9-2320-361-10
TM 9-2320-361-34P
General mechanic’s tool kit
(Appendix B, Item 1)
EQUIPMENT CONDITION
Hydraulic jack
. Wheels chocked (TM 9-2320-361-10).
Jack stands
MATERIALSIPARTS
●
Parking brake set (TM 9-2320-361-10).
●
Engine oil drained (LO 9-2320-209-12-1).
Thirty lockwashers (Appendix F, Item 123)
Gasket (Appendix F, Item
47)
Sealing compound, gasket forming
(Appendix C, Item 19)
1. Place hydraulic jack under driver’s side front axle
(4)
and rake vehicle.
2. Place jack stand under driver’s side frame (1) and lower hydraulic jack.
3. Remove thirty screws (6), lockwashers (7), oil pan (8), and gasket (5) from engine block (3) and
timing cover (2). Discard lockwashers (7) and gasket (5).
4.
Remove gasket remains from oil pan (8), engine block (3), and timing cover (2).
1. Apply light coat of sealing compound to new gasket (5).
2. Install new gasket (5) and oil pan (8) on engine block (3) and timing cover (2) with thirty new
lockwashers (7) and screws (6).
3. Place hydraulic jack under driver’s (left) side front axle (4) and raise vehicle.
4. Remove jack stand from under frame (1).
5. Remove hydraulic jack.
3-3 4
Back to Top
