TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 91 of 764
TM 9-2320-361-34
I
3-13. OIL PRESSURE REGULATOR HOUSING MAINTENANCE
THIS
TASK COVERS:
a.
Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning and Inspection
INITIAL SETUP
APPLICABLE MODELS
All
REFERENCES (TM)
TM 9-2320-361-10
TOOLS
TM 9-2320-361-34P
General mechanic’s
tool
kit
EQUIPMENT CONDITION
(Appendix B, Item 1)
●
Parking brake set (TM 9-2320-361-10).
Spring tester (Appendix B, Item 38)
●
Hood raised and secured (TM 9-2320-361-10).
Inside micrometer (Appendix B, Item 16)
Outside micrometer (Appendix B, Item 17)
Torque wrench, l/2-in. dr. (Appendix B, Item 7)
MATERIALS/PARTS
Gasket (Appendix F, Item 83)
Two
gaskets (Appendix F, Item 51)
Four lockwashers (Appendix F, Item 123)
Crocus cloth (Appendix
C,
Item 7)
a. Removal
NOTE
●
Perform
steps
1 and 2 for vehicles equipped with engine models
LD-465-1 and LD-465-1C.
●
Perform
step 3 for vehicles equipped with engine models
LDT-465-1C and LDT-465-1D.
1. Remove screw (1) and lockwasher (2) from bracket (3) and engine (4). Discard lockwasher (2).
2.
Remove three screws (1), lockwashers (2), regulator valve housing (6) and gasket (5) from engine (4).
Discard gasket (5) and lockwashers (2).
3. Remove four screws (1), lockwashers (2), regulator valve housing (6) and gasket (5) from engine (4).
Discard gasket (5) and lockwashers (2).
3-40
Back to Top
