TM-9-2320-362-14-P

TRUCK UTILITY: S250 SHELTER CARRIER, 4X4, M1037 FOR TRAFFIC JAM AN/TLQ-17A(V)3 (HMMWV)

TECHNICAL MANUAL; OPERATOR, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ELECTRICAL ENVIRONMENTAL SYSTEM (EES)

APRIL 1992

TM-9-2320-362-14-P - Page 172 of 353

TM 9-2320-362-14& P

4-18.

EES KIT INSTALLATION (Cont’d)

w.

200

Amp Alternator Ground Strap Installation

1.

2.

3.

4.

5.

NOTE

Ensure terminal is clean before connection is made.

Apply copper shield sparingly to bolt (8) surface of ground

strap (4),

Insert bolt (8) through hole in ground strap (4).

Install bolt (8) and ground strap (4) to upper hole on mounting

bracket (6).

Tighten to 48 lb-ft (65 N·m).

Remove nut (1), lockwasher (2),

and lead 3B (3) from ground

stud (7) on 200 amp alternator (5).

Retain lockwasher (2) for

installation.

Install ground strap (4) and lead 3B (3) to ground stud (7) and

secure with lockwasher (2) and nut (1).

Tighten nut (1) to

96-144 lb-in. (11-16 N·m).

4-6 0