TM-9-2320-362-14-P

TRUCK UTILITY: S250 SHELTER CARRIER, 4X4, M1037 FOR TRAFFIC JAM AN/TLQ-17A(V)3 (HMMWV)

TECHNICAL MANUAL; OPERATOR, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ELECTRICAL ENVIRONMENTAL SYSTEM (EES)

APRIL 1992

TM-9-2320-362-14-P - Page 176 of 353

TM 9-2320-362-14&P

4-18. EES KIT INSTALLATION (Cont’d)

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

4-64

Remove four screws (6) and lockwashers (7) that secures cover (8)

and gasket (5)

Remove nut (9)

to regulator (4).

Remove cover (8) and gasket (5).

NOTE

Tag leads for installation.

and lockwasher (10) that secures wire no. 5A (11)

to stud (3) and disconnect wire no. 5A (11).

Remove rubber wedge (14) from opening in regulator (4).

Remove nut (12) and lockwasher (13) that secures old wire no.

568 (2) to stud (3) and disconnect old wire no. 568 (2).

Disconnect old wire no. 568 (2) from wire no. 568A (1) and remove

old wire no. 568 (2).

Connect new wire no.

568 (2) to wire no. 568A (1) and install into

rubber wedge (14).

Install new wire no. 568 (2) to stud (3) and secure with

lockwasher (13) and nut (12).

Install wire no. 5A (11) to stud (3) and secure with lock-

washer (10) and nut (9).

Install rubber wedge (14) in opening in regulator (4).

Install gasket (5) and cover (8) to regulator (4) and secure

with lockwashers (7) and four screws (6).