TM-9-2320-365-20-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-2 - Page 1069 of 1432

VOLTAGE TEST

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

WARNING

Change 2

2-1979

TM 9-2320-365-20-2

(1) Remove wing screw from power

distribution shelf.

(2) Loosen wing screw on electrical

distribution block cover.

(3) Remove electrical distribution block cover

from power distribution shelf.

(4) Remove dust boot from terminal lug TL16.

(5) Set multimeter to volts DC.

(6) Connect positive (+) probe of multimeter

to terminal lug TL16.

(7) Connect negative (-) probe of multimeter to

known good ground and note reading on

multimeter.

(8) If 24 VDC is not present, go to step 2 of

this fault.

(9) If 24 VDC is present, go to step 5 of this

fault.

(10) Install dust boot on terminal lug TL16.