TM 9-2320-365-34-2
Change 2
9-20.1
b. Installation.
(1)
Apply a small amount of sealing compound to outside
edge and spring cavity of pinion seal (1).
(2)
Install pinion seal (1) in front differential carrier (2).
(3)
Visually verify pinion seal (1) is properly seated.
(4)
Install yoke seal (3) on drive yoke (4).
(5)
Install drive yoke (4) on pinion shaft (5) with drive
yoke nut (6).
(6)
Tighten drive yoke nut (6) to 920-1130 lb-ft (1248-
1532 N•m).
(7)
Remove drive shaft (7) from leaf spring (8).
NOTE
Step (7) requires the aid of an assistant.