TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 499 of 1414

TM 9-2320-365-34-2

Change 2

9-21

(9)

Tighten four screws (11).

(9.1) Tighten four screws (11) to 26-35 lb-ft (35-47 N•m).

(9.2) Fold tabs on four screws (11).

(10) Apply lubrication to grease fittings (TM 9-2320-366-20).

c. Follow-On Maintenance.

(1)

Check differential oil level (TM 9-2320-365-20).

(1.1)Lubricate drive shaft universal joint and slip yoke (TM 9-

2320-365-20-1).

(2)

Operate vehicle and check differential for proper

operation (TM 9-2320-365-10).

(3)

Shut down engine (TM 9-2320-365-10).

(4)

Check pinion seal for oil leaks.

End of Task.

CAUTION

Grease must flow from all four seals.

Failure

to comply may result in damage to equipment.

NOTE

•

Perform the following step on kits

equipped with shear head screws.

•

Alternately tighten screws

•

When correct torque is reached,

bearing cap small screw hex head will

break off.

NOTE

Perform the following two steps on bearing

cups equipped with tabs