TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1035 of 1824

CONTINUITY TEST

Change 1

2-604.103

TM 9-2320-366-20-1

(7)

Install lockwasher, terminal lug TL89,

lockwasher, and nut on RH intermediate

marker light screw.

(8)

Connect RH intermediate marker light

connector to connector P95.

(1)

Remove nut, lockwasher, terminal lug

TL89, and lockwasher from RH intermediate

marker light screw.

Discard lockwashers.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter

to terminal lug TL89.

(4)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5)

If continuity is not present, repair

wire

3090 from terminal lug TL89 to terminal

lug TL90 (para 2-45) and go to step 6 of

this fault if required or replace M1086/

M1089 rear lights cable assembly

(para 7-104) or M1085/M1096 rear lights

cable assembly (para 7-84) and go to step

1 of this fault.

(6)

If continuity is present, replace RH

intermediate marker light (para 7-38) and

go to step 6 of this fault if required.