TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1343 of 1824

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

2-779

2-779

2-779

2-779

2-779

CONTINUITY TEST

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

terminal lug TL154.

(3)

Connect negative (-) probe of multimeter to

PDP, terminal 85, where relay K6 was

removed, and note reading on multimeter.

(4)

If continuity is not present, repair wire 1594

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(5)

Install relay K6 in PDP.

(6)

Install PDP cover (para 16-2).

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

terminal lug TL155.

(3)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(4)

If continuity is not present, repair wire 3043

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(5)

If continuity is present, replace both stoplight

switches (para 11-27).