TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1337 of 1824

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

2-773

2-773

2-773

2-773

2-773

VOLTAGE TEST

Remove rings, bracelets, watches,

necklaces, and any other jewelry

before working around vehicle.

Jewelry can catch on equipment

and cause injury or short across

electrical circuit and cause severe

burns or electrical shock.

WARNING

(1)

Remove PDP cover (para 16-2).

(2)

Remove relay K6 from PDP.

(3)

Set multimeter to volts dc.

(4)

Connect positive (+) probe of multimeter to

PDP, terminal 86, where relay K6 was

removed.

(5)

Connect negative (-) probe of multimeter to

ground.

(6)

Position master power switch to on

(TM 9-2320-366-10-1) and note reading on

multimeter.

(7)

If 12 vdc is not present, go to step 7 of

this fault.

(8)

Position master power switch to off

(TM 9-2320-366-10-1).