CONTINUITY TEST
CONTINUITY TEST
Change 2
2-955
TM 9-2320-366-20-2
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
connector P110 socket R.
(3) Connect negative (-) probe of multimeter to
connector P112 socket D and note reading
on multimeter.
(4)
If continuity is not present, replace CTIS
cable assembly (para 7-60).
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
connector P110 socket B.
(3) Connect negative (-) probe of multimeter to
connector P112 socket F and note reading
on multimeter.
(4) If continuity is not present, replace CTIS
cable assembly (para 7-60).