CONTINUITY TEST
CONTINUITY TEST
TM 9-2320-366-20-2
Change 2
2-957
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
connector P110 socket P.
(3)
Connect negative (-) probe of multimeter to
terminal lug TL50 and note reading on
multimeter.
(4)
If continuity is not present, replace CTIS
cable assembly (para 7-60).
(5) Connect connector P110 to CTIS ECU.
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
connector P110 socket C.
(3)
Connect negative (-) probe of multimeter to
connector P112 socket E and note reading
on multimeter.
(4)
If continuity is not present, replace CTIS
cable assembly (para 7-60).