TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 57 of 1632
RESISTANCE TEST
RESISTANCE TEST
(1) Disconnect connector P113 from pressure
transducer connector.
(2) Set multimeter to ohms.
(3) Connect positive (+) probe of multimeter to
pressure transducer connector pin A.
(4) Connect negative (-) probe of multimeter to
pressure transducer connector pin B and
note reading on multimeter.
(5) If 1-50 ohms resistance is not present, replace
pressure transducer (para 12-7).
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
pressure transducer connector pin B.
(3) Connect negative (-) probe of multimeter to
pressure transducer connector pin C and
note reading on multimeter.
(4) If 1-50 ohms resistance is not present, replace
pressure transducer (para 12-7).
Change 2
2-958.5
TM 9-2320-366-20-2
Back to Top
