TM 9-2320-366-34-2
10-34.2
Change 2
10-6.
INTERMEDIATE AXLE DIFFERENTIAL CARRIER REPLACEMENT (CONT)
(1) Position intermediate differential carrier (3) on
transmission/differential lift.
(2)
Position intermediate differential carrier (3) on axle
assembly (2) with six washers (4) and screws (5).
(3) Remove transmission/differential lift from
intermediate differential carrier (3).
(4)
Position six washers (6) and screws (7) on bottom
half of intermediate differential carrier (3).
(5) Tighten six screws (5 and 7) to 74-98 lb-ft
(100-133 N
•
m).
WARNING
Intermediate differential carrier weighs
approximately 350 lbs (159 kgs).
Attach a
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.