TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 197 of 1178

TM 9-2320-366-34-3

Change 2

15-123

15-8.

M1090 REAR FENDER MOUNTING BRACKET AND EXTENSION BRACKET

REPLACEMENT

This task covers:

a. Removal

b. Installation

c.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Dump body raised to maintenance position (TM 9-

2320-366-10-1).

Rear fender removed (TM 9-2320-366-20-4).

Tools and Special Tools

Tool Kit, Genl Mech (Item 78, Appendix B)

Goggles, Industrial (Item 28, Appendix B)

Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B)

Tools and Special Tools (Cont)

Wrench Set, Socket (Item 84, Appendix B)

Materials/Parts

Bolt (2) (Item 7, Appendix F)

Bolt (3) (Item 8, Appendix F)

Nut, Self-Locking (5) (Item 205, Appendix F)

Personnel Required

(2)

a.

Removal.

(1)

Remove two self-locking nuts (1), bolts (2), and

extension bracket (3) from rear fender mounting

bracket (4).

Discard self-locking nuts.

WARNING

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

NOTE

•

Left and right side rear fender mounting

brackets and extension brackets are

removed the same way.

Left side shown.

•

Steps (1) and (5) require the aid of an

assistant.