TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 585 of 1178

TM 9-2320-366-34-3

(12) Remove three self-locking nuts (32) and screws (33)

from mounting plate (34). Discard self-locking nuts.

(13) Remove

two

self-locking

nuts

(35),

screws

(36),

mounting plate (34), and monoblock valve (37) from 30K

winch assembly (10). Discard self-locking nuts.

NOTE

• Left and right side maker lights are removed the

same way. Left side shown.

• Refer to

Table 16-1. Clearance Marker Light

Connectors

for combinations of terminal lugs

and connections on each marker light.

(14) Remove nut (38), washer (39), and terminal lug (40)

from marker light (41).

(15) Disconnect electrical connector 489 (42) from harness

connector (43).

(16) Remove

electrical

harness

(44)

from

30K

winch

assembly (10).

(17) Removed three self-locking nuts (45), screws (46), and

lamp bracket (47) from 30K winch assembly (10).

Discard self-locking nuts.

(18) Perform steps (14) through (17) on right side marker light.

Table 16-1. Clearance Marker Light Connectors

Marker Light Location

Connector

Terminal Lug

Left Side

P94

TL88

Right Side

P95

TL89

Change 1

16-349