TM-9-2320-366-34-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 3 OF 4

AUGUST 2005

CHANGE 2

TM-9-2320-366-34-3 - Page 835 of 1178

TM 9-2320-366-34-3

Change 2

16-573

b. Disassembly.

(1)

Remove oil seal (1) from bearing cap (2).

Discard

oil seal.

(2)

Remove four screws (3) from bearing cap (2).

(3)

Remove bearing cap (2) and gasket (4) from

housing (5).

Discard gasket.

(4)

Remove solenoid electrical connector (6) from

housing (5).

(5) Remove retaining ring (7) from bearing cap (2).

(6) Remove output shaft (8) from bearing cap (2).

(7) Remove retaining ring (9) and bearing (10) from

bearing cap (2).

(8)

Remove spacer (11) from output shaft (8).

(9)

Remove retaining ring (12) from output shaft (8).

(10)

Remove clutch back-up cylinder (13), vee ring

(14), and piston (15) from output shaft (8).

NOTE

(11)

Remove key (16) from output shaft (8).

WARNING

Use care when removing retaining

rings.

Retaining rings are under

tension and can act as projectiles when

released.

Failure to comply may result

in injury to personnel.

Perform step (11) on PTO Assembly (P/N

276XMF-JX-D5XK).