TM 9-2320-366-34-3
16-93. POWER TAKEOFF (PTO) REPLACEMENT/REPAIR (CONT)
(12) Remove spring (17) from output shaft (8).
(13) Remove two preformed packings (18) from output shaft
(8). Discard preformed packings.
(14) Remove seven clutch plates (19) and eight friction plates
(20) from output shaft (8).
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to
comply
may
result
in
injury
to
personnel.
(15) Remove retaining ring (21), thrust washer (22), and outer
clutch gear (23) from output shaft (8).
(16) Remove needle bearing (24) from outer clutch gear (23).
(17) Remove inner clutch gear (25) from output shaft (8).
(18) Remove retaining ring (26) and back-up ring (27) from
output shaft (8).
16-574