TM 9-2320-366-34-3
(16) Remove two nuts (14) and washers (15) from hydraulic
pump (7).
(17) Position support bracket (16) on hydraulic pump (7) with
two washers (15) and nuts (14).
(18) Position three bolts (17) in support bracket (16).
(19) Tighten three bolts (17) to 66-81 lb-ft (90-110 N·m).
(20) Tighten two nuts (14) to 180-200 lb-ft (243-297 N·m) in
increments of 50 lb-ft (68 N·m).
(21) Position hose (18) on adapter (19).
(22) Tighten hose (18) to 79-88 lb-ft (107-119 N·m).
(23) Position two hoses (10) on tubes (20).
(24) Tighten two hoses (10) to 79-88 lb-ft (107-119 N·m).
c. Follow-On Maintenance
(1) Install hydraulic tank (TM 9-2320-366-20-5).
(2) Connect batteries (TM 9-2320-366-20-3).
(3) Operate
wrecker functions
and
check for
proper
operations and hydraulic leaks (TM 9-2320-366-10-2).
End of Task.
16-569