TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 105 of 1078

TM 9-2320-386-24-1-1

0016 00

0016 00-6

Table 2. STE/ICE-R GO-Chain Tests (Contd)

VTM CONNECTIONS AND CHECKOUT

(Contd)

G01

DCA

MODE

5

PERFORM DCA TRANSDUCER OFFSET TESTS:

• Engine must be off.

• Dial the offset number listed into the

TEST/SELECT switches.

• Press and hold TEST each time until message

CAL appears on the display.

• When CAL appears, release TEST.

• Compare the result on the VTM for the vehicle

being tested with the specification listed for each

DCA offset in TM 9-4910-571-12&P.

PROMPTING

MESSAGE

• Is the transducer offset within its limit?

NO

YES

• Refer to TM 9-4910-571-12&P

to troubleshoot DCA harness

connections.

• Repeat offset test.

• If no fault is found, notify DS

maintenance.

G02

• Proceed to First Peak Test

– Starter Current, G02.