TM 9-2320-386-24-1-1
0017 00
0017 00-3
Table 2. STE/ICE-R NO-GO-Chain Test (Contd)
NOTE
Test G01, VTM Connections and Checkout, must be
performed before running any other STE/ICE-R test.
NO CRANK – NO START
NG20
DCA
MODE
1
TRY TO CRANK ENGINE:
• Set vehicle controls to crank engine.
• Engage starter switch and listen to starter motor.
• Does starter motor sound like it is running
overspeed?
NO
YES
• Proceed to step 2.
• Sound is buzz, hum, click, etc., or there is no
sound. Proceed to Starter Circuit Tests, NG80.
NG80
2
CHECK TEETH ON FLYWHEEL:
• Remove starter motor (WP 0091 00).
• Check for missing and/or damaged teeth on flywheel.
• Are all teeth good?
YES
NO
• Replace starter motor (WP 0091 00).
• Notify DS maintenance.
NOTE
After completing repair, rerun the GO-
Chain tests to verify that the problem is
fixed and that no other problems exist.