TM-9-2320-386-24-1-1

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2

MAY 2001

TM-9-2320-386-24-1-1 - Page 126 of 1078

TM 9-2320-386-24-1-1

0017 00

0017 00-8

Table 2. STE/ICE-R NO-GO-Chain Tests (Contd)

NOTE

Test G01, VTM Connections and Checkout, must be

performed before running any other STE/ICE-R test.

GAUGE TEST

NG31

DCA

MODE

1

INSTALL TEST PROBE CABLE:

• Connect P1 of test probe cable W2 to J4 on VTM.

• Touch red and black leads together.

2

DO TEST PROBE CABLE OFFSET:

• Dial 89 into TEST SELECT.

• Press and hold TEST until CAL message

appears on display.

• Release TEST.

• Wait for offset value to appear on display.

• Is offset value within limits of -6.8 to +6.8?

PROMPTING

MESSAGE

NO

YES

• STE/ICE-R is bad. Replace.

• Proceed to step 3.

3

TEST NO.

TEST

89

0-45 VOLTS DC