TM-9-2320-386-24-1-1
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2
MAY 2001
TM-9-2320-386-24-1-1 - Page 724 of 1078
UPPER SHACKLES AND BRACKETS INSTALLATION
1.
Install two spacers (8) and upper brackets (7) on bumper (11) and left (17) and right (10) upper
bumper support brackets with two screws (5) and new locknuts (9).
2.
Install three spacers (12) between upper (17) and (10) and lower (16) and (13) bumper support
brackets with four screws (1) and new locknuts (14).
3.
Slide two screws (15) through lower bumper support brackets (16) and (13) and upper brackets (7)
and install new locknuts (6).
4.
Install two upper shackles (4) on upper brackets (7) with pins (3).
5.
Install two retaining pins (2) on pins (3). Latch retaining pins (2).
6.
Install rain cover (21) on left upper bumper support bracket (17) with two screws (24) and new
locknuts (23).
7.
Install blackout drive lamp (19) with mounting bracket (20) on left lower bumper support
bracket (16) with two screws (22) and new locknuts (18).
8.
Install winch chain on bumper (TM 9-2320-386-10).
2
1
3
4
6
5
7
8
9
2
3
4
1
10
11
12
13
14
15
15
12
14
16
17
11
LEFT SIDE
RIGHT SIDE
~
~
~
~
0189 00-6
TM 9-2320-386-24-1-1
0189 00
FRONT UPPER AND LOWER SHACKLES AND BRACKETS (W/WINCH) REPLACEMENT (Contd)
Back to Top
