TM-9-2320-386-24-1-1
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 1 OF 2
MAY 2001
TM-9-2320-386-24-1-1 - Page 858 of 1078
8
1
3
2
7
6
4
5
~
8
1
9
7
~
LEFT SIDE ONLY
NOTE
Left and right rear bumperettes are replaced the same way. This
task covers the left rear bumperette.
REMOVAL
1.
Remove two locknuts (2) and screws (4) from crossmember (3) and rear bumperette (5). Discard
locknuts (2).
NOTE
Wiring harness clamp is located on left side only.
2.
Remove four locknuts (1), screws (7), composite light bracket (6), clamp (9), and rear bumperette (5)
from frame (8). Discard locknuts (1).
INSTALLATION
1.
Install rear bumperette (5) on rear crossmember (3) with two screws (4) and new locknuts (2).
NOTE
Wiring harness clamp is located on left side only.
2.
Install composite light bracket (6) and clamp (9) on bumperette (5) and frame (8) with four
screws (7) and new locknuts (1).
3.
Install trailer air coupling (WP 0164 00).
4.
Install rear composite light (WP 0106 00).
0228 00-2
TM 9-2320-386-24-1-1
0228 00
REAR BUMPERETTE REPLACEMENT (Contd)
END OF WORK PACKAGE
Back to Top
