TM-9-2320-386-24-1-2
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 2 OF 2
MAY 2001
TM-9-2320-386-24-1-2 - Page 295 of 636
1
2
2
3
5
6
7
8
~
9
8
4
3
17
11
16
15
~
14
13
12
10
10
8.
Position two clamps (3) on wiring harness (10) and install three clamps (3) on crossmember (9) with
two screws (8) and new locknuts (2).
9.
Install two ground (GND) leads (4) on crossmember (9) with new lockwasher (6), screw (5), and new
locknut (7) and install new tiedown straps (1), as necessary, to remove slack in wiring harness (10).
10.
Position clamp (14) on wiring harness (10) and install clamp (14) on bracket (15) with screw (16),
washer (13), and new locknut (12).
11.
Connect harness plug with leads 27 and ground (GND) (17) to manifold power harness
connector (11).
TM 9-2320-386-24-1-2
0332 00
REAR WIRING HARNESS REPLACEMENT (Contd)
0332 00-8
Back to Top
