TM-9-2320-386-24-1-2
2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 2 OF 2
MAY 2001
TM-9-2320-386-24-1-2 - Page 287 of 636
28.
Route STE/ICE-R wiring harness (14) and battery positive cable (17) through frame rail (9) and
grommet (10).
29.
Install slave receptacle cable (1), STE/ICE-R terminal with leads 770-E and 770-V (20), and positive
battery cable (17) on positive battery post clamp (19) with screw (21) and nut (18).
30.
Install STE/ICE-R terminal lead 770-X (8) on frame rail cable positive (+) side of shunt (24) with
washer (2), new lockwasher (5), and screw (7).
31.
Install two STE/ICE-R terminal leads with wires 770-Y (3) and 770-W and 770-F (4) on battery
cable negative (-) side of shunt (24) with washer (2), new lockwasher (5), and screw (6).
32.
Install two clamps (16) on STE/ICE-R wiring harness (14) and rear of battery box (23) with two
screws (15) and new locknuts (22).
33.
Install clamp (12) on STE/ICE-R wiring harness (14), slave receptacle cable (1), and frame rail (9)
with screw (13) and new locknut (11).
34.
Connect battery ground cable (WP 0121 00).
~
1
14
24
2
3
4
5
6
7
5
8
2
9
10
11
12
13
1
14
15
16
16
17
18
19
20
21
22
~
23
TM 9-2320-386-24-1-2
0331 00
STE/ICE-R WIRING HARNESS REPLACEMENT (Contd)
0331 00-14
END OF WORK PACKAGE
Back to Top
