TM-9-2320-386-24-1-2

2-1/2-TON, 6X6, M44A3 SERIES TRUCKS (DIESEL)

TECHNICAL MANUAL; EXTENDED SERVICE PROGRAM (ESP); UNIT, DIRECT SUPPORT AND GENERAL SUPPORT; MAINTENANCE MANUAL; VOLUME 2 OF 2

MAY 2001

  TM-9-2320-386-24-1-2 - Page 63 of 636

63.
Remove nut (22), screw (12), and washer (11) from radiator (10) and install end of chain on
radiator (10) with washer (11), screw (12), and nut (22).
64.
Remove nut (7), screw (9), and washer (8) from radiator (10) and install end of chain on radiator (10)
with washer (8), screw (9), and nut (7).
65.
Install chain on lifting device.
WARNING
All personnel must stand clear during lifting operations. A
snapped chain, or shifting or swinging load, may cause injury to
personnel.
CAUTION
When installing radiator, avoid contact with the fan actuator hub.
Contact between the radiator and fan actuator hub can cause
damage to the radiator.
66.
Lift radiator (10) and charged air cooler (13) from floor and lower into position in vehicle.
67.
Install pivot mount (14) on support bracket (18) with four washers (16), screws (15), and new locknuts (17).
68.
Install two screws (24), washers (1) and (5), new bushings front (2) and rear (4) halves, and new
locknuts (6) on braces (3) and (23).
69.
Install hose (21) on lower flange (19) of radiator (10) and tighten clamp (20).
70.
Install screw (27), washer (28), new rear bushing half (29), new front bushing half (30), washer (31),
and new locknut (32) on braces (25) and (26). Tighten locknut (32) 27-33 lb-ft (37-45 N
•
m).
71.
Remove nuts (7) and (22), screws (9) and (12), washers (8) and (11), and chain from radiator (10),
charged air cooler (13), and lifting device.
72.
Install washers (8) and (11), screws (9) and (12), and nuts (7) and (22) on radiator (10).
8
9
~
10
11
12
~
13
14
16
15
17
18
~
19
20
21
~
22
24
1
2
3
~
4
5
6
7
LIFTING
DEVICE
CHAIN
23
TM 9-2320-386-24-1-2
0295 00
POWER PLANT REPLACEMENT (Contd)
0295 00-34


Back to Top