TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 882 of 1205

5-8

Change 1

5-3. TRANSMISSION OIL COOLER LINES REPLACEMENT (Cont’d)

1.

Install clamps (22), (24), (25), and (27) on hoses (21) and (29). Install hoses (21) and (29) on

tees (10) and (13).

2.

Install clamps (14), (16), (19), and (26) on hoses (15) and (20). Install hoses (15) and (20) on

tees (10) and (13).

3.

Install two clamps (12) on hose (11). Install hose (11) on line (8) and tee (13).

4.

Install two clamps (28) on hose (9). Install hose (9) on line (31) and tee (10).

5.

Install two clamps (1) and (3) on two hoses (2). Install hoses (2) on lines (7) and (31).

6.

Install lines and hoses as an assembly on vehicle and connect lines (7) and (8) to transmission (30).

7.

Connect hoses (2) to transfer case (34).

8.

Connect hoses (21) and (29) to bypass valve (23).

9.

Connect hoses (15) and (20) to lines (17) and (18).

10.

Install two washers (5), capscrews (4), washers (33), and locknuts (32) on four retaining clamps (6)

and cooler lines (7) and (31).

b. Rear Lines Installation

TM 9-2320-387-24-1