TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 873 of 1205

TM 9-2320-387-24-l

4-80. WIRING HARNESS CONNECTOR REPAIR

(Cont’d)

c. Female Cable Connector

Repair

1.

Strip cable insulation (12) from cable (13) to equal depth of terminal well (16).

2.

Slide shell (14) and sleeve (15) over cable insulation (12).

3.

Insert cable (13) into terminal well (16) and crimp.

4.

Slide shell (14) and sleeve (15) over terminal (17).

d. Connector

Assembly

Repair

1.

2.

3.

4.

5.

NOTE

Refer to TB SIG222

for

soldering instructions.

Strip cable insulation (18) to depth of solder wells (21) on inserts (22).

Slide cable ends (25) through grommet retaining nut (19) and grommet (20).

Place cable ends (25) into solder wells (21) and solder.

Slide grommet (20) over inserts (22) and press into shell assembly (23) and coupling nut (24) until

seated.

Screw grommet retaining nut (19) into shell assembly (23) until seated.

MALE INSERT

OR

FEMME

INSERT

4-147