TM-9-2320-387-24-1

TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 1

DECEMBER 1997

CHANGE 1

TM-9-2320-387-24-1 - Page 867 of 1205

I

TM 9-2320-387-24-l

4-79. HOOD JUMPER WIRING HARNESS REPLACEMENT

(Cont’d)

2.

Remove nut (71, lockwasher W, and special washer (9) from blackout drive light (3) and hood (10).

Discard lockwasher (8).

3.

Disconnect lead 19B (5) from blackout drive light (3).

4.

Remove blackout drive light (31, ground lead 92C (4), and coned mounting washer (6) from swivel

bracket (11).

5.

Disconnect harness leads 20E (12),461B (211, and 491C (19) from left composite light terminals (20).

6.

Remove capscrew (141, lockwasher (13), and left composite light ground 92B (15) from buss bar (16).

Discard lockwasher (13).

7.

Remove rubber grommet (18) from hood (10).

8.

Remove hood jumper wiring harness (17) from hood (10).

4-141