TM-9-2320-387-24-2
TRUCK, UTILITY: S250 SHELTER CARRIER, 4X4, M1113
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE, VOLUME 2
DECEMBER 1997
CHANGE 1
TM-9-2320-387-24-2 - Page 377 of 1555
TM 9-2320-387-24-2
12-2.2
Change 1
12-3. ENGINE/CREW COMPARTMENT HEATER EXHAUST MUFFLER REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Lockwasher (Appendix G, Item 238)
Manual References
TM 9-2320-387-24P
General Safety Instructions
Do not touch hot exhaust system components with
bare hands.
Maintenance Level
Unit
1.
Remove nut (7), lockwasher (6), washer (5), capscrew (8), and muffler (1) from bracket (4). Discard
lockwasher (6).
2.
Loosen clamp (2) and remove muffler (1) from exhaust pipe (3).
.
WARNING
.
Do not touch hot exhaust system components with bare hands.
Severe injury may result.
a. Removal
b. Installation
1.
Install muffler (1) on exhaust pipe (3) and tighten clamp (2).
2.
Install muffler (1) on bracket (4) with capscrew (8), washer (5), lockwasher (6), and nut (7).
1
2
3
4
~
5
6
7
8
Back to Top
